A. Atanassov, G. Zlateva, M. Baleva,*E. Goranova, B. Amov, C. Angelov, V. Mikli// Raman Scattering Characterization of Ion-Beam Synthesized Mg2Si, 1Influence of the Technological Conditionson the Formation of the Mg2Si in (100)Si Matrix. Plasma Process. Polym. 2006, 3, 219–223

A. K. Stoyanova-Ivanova , S. D. Terzieva, A. D. Staneva, V.Mikli, R.Traksmaa, Y. B. Dimitriev and V. T. Kovachev. Phase formation and microstructure in RE1-xCaxBa2Cu3Oz (RE=Y,Eu,Er; x=0,0.2,0.3) superconducting ceramics// Central European J. Chem, 4 (1), 167-174 (2006)

Angelov, Ch., Mikli, V., Amov, B. and Goranova, E. AFM and SEM investigations of ion beam synthesized Mg2Si precipitates in Si substrates// J. of Optoelectronics and Advanced Materials, 2005, Vol. 7, No.1, p. 369-373

Krunks, M., Kijatkina, O., Mere, A., Varema, T., Oja, I., Mikli, V. Sprayed CuInS2 films grown under Cu-rich conditions as absorbes for solar cells// Solar Energy Materials and Solar Cells, 2005, v. 87, p.207-214

K. Tõnsuaadu, K. Vatter, M. Peld, V. Mikli. Impact of Chelating Cd2+ Sorption with Apatites // Abstracts of 5th Int.Symp. on Inorg. Phosphate, Japan, 2005, p. 80.

Kulu, P., Mikli, V., Käerdi, H., Besterci, M. Angularity evaluation of milled WC-Co powder// Int. J. Materials and product Technology, 2005, Vol.22, No4, p. 289-298

Mikli V. Influence of second order lines on low accelerating voltage quantitative WDS analysis// Abstracts of 9th Eur Workshop, EMAS, 2005, Firenze, p. 314

Tarbe, R., Zimakov, S., Mikli,V., Kulu, P., Veinthal, R. Wear resistant powder coatings on the base of recycled hardmetal//Powder Metallurgy Progress, 2005, Vol.4, No3, p. 148-157 ISSN 1335-8987

Terzieva, S., Stoyanova-Ivanova, A., Zalamova, K., Mikli, V., Angelov, Ch. and Kovachev, V. Morphology of Y1Ba2Cu3Oz and Y0.7Ba2Cu3Oz bulk samples depending on Ca-substitution // J. of Optoelectronics and Advanced Materials, 2005, Vol.7, No.1, p. 477-481

Tõnsuaadu, K., Peld, M., Mikli, V., Bender, V., Traksmaa, R., Villani, F., Gruselle, M. Structural studies of apatite// Abstracts of NENANAT 2005, Tallinn, p. 19-21

V. Mikli, J. Hiie. Recrystallization of CdTe under conditions of high temperature and pressure// NATO Sci., II. Math, Phys, Chem. Nanostructured and advanced materials, V204, 2005, p. 351-354.ISBN 1-4020-3561-6

А. Стоянова –Иванова, С. Терзиева, V. Mikli, R. Traksmaa и В. Ковачев. Текстура и структура на горещо валцувани YBCO ленти с калциева (Ca) субституция” (“TEXTURE AND STRUCTURE OF HOT-ROLLING YBCO TAPES WITH Ca-SUBSTITUTION ”)// Списание на БАН (Magazine of BAS), 5, 1-4 (2005)

J. Hiie, V. Valdna, J. Kois, M. Danilson, V. Mikli. Chemistry of CdCl2:O2 Flux for CdTe Solar Cell Technology// 19th EPVSECE, Paris, 7-11.o6.2004.4AV.1.65

Mikli, V., Kulu, P., Tarbe, R. Peetsalu P., Zimakov, S. Recycled hardmetal–based powders for thermal spray// Proc. Estonian Acad. Sci. Eng., 2004, 10, 4, p. 315-325.

Zimakov, S., Mikli, V., Kulu, P., Tarbe, R. Wear resistant sprayed coatings on the base of recycled hardmetal powder//Proc. of 13th Int. Conf. Engineering Materials& Tribology, 2004, Riga, p. 83-88.

V. Mikli, P. Kulu, R. Tarbe, P. Peetsalu. Double-Cemented Recycled Hardmetal Based Powders for Thermal Spray// Proc. 4rd Int. DAAAM Conf., Tallinn, 2004, p. 211-214. ISBN 9985-894-69-3

Kulu, P., Mikli, V., Käerdi, H., Besterci, M. Characterization of disintegrator milled hardmetal powder//Powder Metallurgy Progress, 2003, Vol.3, No1, p. 34-48.ISSN 1335-8987

Pavlov L.I., Angelov Ch.V., Mikli V., Amov B.G., Djakov A.E. Microstructural changes and optical properties of laser annealed bismuth-implanted silicon// Vacuum, 2003, 69, p. 119-124.

Peetsalu, P., Zimakov, S., Goljandin, D., Kulu, P., Mikli. M., Käerdi, H. Micropowders produced by disintegrator milling//Abstracts of 12th Int. Conf. Engineering Materials& Tribology, BALTMATTRIB2003, Tallinn, 2003, p. 32-33

P. Peetsalu, D. Goljandin, P. Kulu, V. Mikli, H. Käerdi. Micropowders produced by disintegrator milling//Powder Metallurgy Progress, 2003, Vol.3, No2, p. 99-110. ISSN 1335-8987

Zimakov, S., Pihl, T., Kulu, P., Antonov, M, Mikli, V. Applications of recycled hardmetal powder//Abstracts of 12th Int. Conf. Engineering Materials& Tribology, BALTMATTRIB2003, Tallinn, 2003, p. 43-44.

Zimakov, S., Pihl, T., Kulu, P., Antonov, M, Mikli, V. Applications of recycled hardmetal powder// Proc. Estonian Acad. Sci. Eng., 2003, 9/4, p.304-316.

I Kohutek, H. Käerdi, M. Besterci, P. Kulu, V. Mikli, O.Velgosova.WC-Co powder particles morphological characteristics// Proc. Int. Conf. Deformation and fracture in structural PM materials, DF PM 2002, Stara Lesna, Slovakkia, 2002, p. 230-235.

M. Krunks, O. Kijatkina, H. Rebane, I. Oja, V. Mikli, A. Mere. Composition of CuInS2 thin films prepared by spray pyrolysis// Thin Solid Films, 2002, v. 403-404, p.71-75.

P. Kulu, H. Käerdi V. Mikli. Retreatment of used hardmetals// Proc. of TMS2002 Recycling and Waste Treatment in Mineral and Metal Processing: Technical and Economic Aspects, Vol. 1, 2002, Sweden, 139-146.

V. Mikli, P. Kulu, H. Käerdi. Angularity of the disintegrator ground hardmetal powder particles// Proc. Lithuanian Acad. Sci. Materials Science, 2002, Vol.8, 4, p. 430-433. ISSN 1392-1320

V. Mikli, P. Kulu, H. Käerdi. Development of the morphology and granulometry methods for characterization of WC-Co hardmetal powders// Proc. 3rd Int. DAAAM Conf., Tallinn, 2002, p. 201-204. ISBN 9985-59-272-7

Ch. Angelov, P. Groudev, V. Mikli. Use of atomic-force microscopy for characterization of silicon, implated with heavy ions at high doses// Proc.of 11th Conf. ”Materials for Information tech.in the new Millenium”, ISCMP, 2000, Varna, p. 460-464

Ch. Angelov, V. Mikli, M. Kalitzova, G. Beshkov. Pb and Bi nanoclaster precipitation in high-dose implated and RTA Si: SEM and RHEED analyses//Proc.of 11th Conf. ”Materials for Information tech.in the new Millenium”, ISCMP, 2000, Varna, p. 452-455.

H. Käerdi, V. Mikli, P. Kulu, O.Velgosova, I Kohutek, M. Besterci. Characterization of hardmetal powder particles// Proc. of 10th Int. Conf., "Mat. Engin. & Balttrib’2001, Jurmala, 2001, p.3-7.

Mikli, V., Käerdi, H., Kulu, P. and Besterci, M. Characterization of powder particle angularity // Acta Metallurgica Slovaca, 7, 2001, p.75-78.

Mikli, V., Käerdi, H., Kulu, P. and Besterci, M. Characterization of powder particle morphology // Proc. Estonian Acad. Sci. Eng., 2001, 7, 1, 22-34.

M. Krunks, O. Bijakina, H. Rebane, A.Oja,. V. Mikli, Mere. Composition of CuInS2 films prepared by spray pyrolysis// Abstracts of E-MRS 2001,05.-08.06. p.4

M. Krunks, O. Bijakina, V. Mikli, H. Rebane, T. Varema, M. Altosaar, E. Mellikov, Sprayed CuInS2 thin films for solar cells: the effect of solution composition and post-deposition treatments// Solar Cells and Solar Cell Materials, 2001, 69, 1, p. 93-98.

M. M. Kaplun, Yu. E. Smirnov, V. Mikli, V. V. Malev. Structure of Cobalt Hexacyanoferrate Films Synthesized from a Complex Electrolyte// Russ. J. of Electrochemistry, 2001, v.37, n.9, p. 914-923.

S. Rudenja, J. Pan, I. Odnewall Wallinder, C. Leygraf, P. Kulu, V. Mikli. Enhanced Passivity of Austenitic AISI 304 Stainless steel by Low-Temperature Ion Nitriding // J. Vac.Sci. Technol. 2001, A19(4), p. 1425-1431.

S. Rudenja, P. Kulu, V. Mikli. Corrosion failure of columnar TiN layer by enhanced anodic oxidation // Abstracts of MRS Meeting, 2001, San-Francisco, S1.2.

V. Mikli, M. Krunks. Investigation of sprayed thin films on glass substrates by X-ray Microanalysis// Abstracts of Int. Conf.on X-ray optics and microanalysis, 2001, p. 117.

V. Mikli, P. Kulu, H. Käerdi. Application of image analysis methods to characterize the impact-milled WC-Co powder particles// Abstracts of 8th Eur. Congress for Stereology and Image Analysis, 2001, p. 196-197

V. Mikli, P. Kulu, H. Käerdi. Application of image analysis methods to characterize the impact-milled WC-Co powder particles// Image Anal Stereology, 2001; 20, p. 199-204. ISSN 1580-3139

V.Mikli,V. Hodireva. Fast EDS analysis for determination of mineralogical objectscomposition// Abstracts of 7th EMAS European Workshop in Tampere 06.-10.05.2001, p.348.

2. V. Mikli, P. Kulu, H. Käerdi. WC-Co hardmetal powders for formation of wear resistant coatings// Proc. 2rd Int. DAAAM Conf., Tallinn, 2000, p. 201-204. ISBN 9985-894-21-9

A. Tümanok, P. Kulu, V. Mikli, H. Käerdi. Technology and equipment for production of hardmetal powders from used hardmetal // Proc. 2rd Int. DAAAM Conf., Tallinn, 2000, p. 197-200 ISBN 9985-894-21-9

M. Krunks, V. Mikli, O. Bijakina, H. Rebane, A. Mere, T. Varema, E. Mellikov. Composition and structure of CuInS2 films prepared by spray pyrolysis// Thin Solid Films, 2000, v. 361-362, p.61-64.

S. Rudenja, I. Odnewall Wallinder, C. Leygraf, P. Kulu, V. Mikli. Enhanced Passivity of Austenitic AISI 304 Stainless steel by Low-Temperature Ion Nitriding // Abstracts of 47th Int. Symp.of American Vacuum Society, 2-6. Oct.2000, p. 73.

T. Pihl, V. Mikli. The technology and properties of sprayed coatings // Proc. 2rd Int. DAAAM Conf., Tallinn, 2000, p. 218-220.ISBN 9985-894-21-9

V. Mikli, P. Kulu, H. Käerdi. The composition and structure investigation of recycled hardmetal powder for thermal spray// Proc. Joint Nordic Conference in POWDER TECHNOLOGY, Stockholm, p. 21.

V. Mikli, P. Kulu, H. Käerdi. The composition and structure investigation of recycled hardmetal powder for thermal spray// Proc. Joint Nordic Conference in POWDER TECHNOLOGY, Stockholm, p. 21.

H. Mändar, J.Felsche, V.Mikli, T.Vajakas, AXES 1.9: new tools for estimation of crystallite size and shape by Williamson-Hall analysis// J. Appl. Cryst., 1999, v.32, p.345-350.

M. Krunks, O.Bijakina, T.Varema, V. Mikli and E. Mellikov, Structural and optical properties of sprayed CuInS2 films// Thin Solid Films, 1999, v. 338, p.125-130.

M. Krunks, O.Bijakina, T.Varema, V. Mikli and E. Mellikov, Zinc oxide thin films by spray pyrolysis method// Physica Scripta, 1999, v.T79, p.209-212.

M. Krunks, O. Bijakina, V. Mikli, H. Rebane, T. Varema, M. Altosaar, E. Mellikov, Sprayed CuInS2 thin films for solar cells: the effect of solution composition and post-deposition treatments// Technical Digest of the International PVSEC-11, Sapporo, Hokkaido, 1999, Japan, p.845-846.

M. Krunks, V. Mikli, O. Bijakina and E. Mellikov, Growth and recrystallization of CuInS2 films in spray pyrolytic process// Applied Surface Science, 1999, v.142, p.356-361.

M. Krunks, V. Mikli, O. Bijakina and E. Mellikov. Growth and recrystallization of CuInS2 films in spray pyrolytic process// The Book of Abstracts of the 9-th International Conference on Solid Films and Surfaces, July 6-10 1998, Copenhagen, Denmark, p.P1.CG.13.

M. Krunks, V. Mikli, O. Bijakina, H. Rebane, A. Mere, T. Varema, E. Mellikov, Composition and structure of CuInS2 films prepared by spray pyrolysis// European Material conference ERRS 1999 Spring Meeting, Strasbourg, June 1-4, Book of abstracts O-PS I/P09, p. O13.

S. Rudenja, C. Leygraf, J. Pan, P. Kulu, E. Talimets, V. Mikli, Duplex TiN coatings deposited by arc plating increased corrosion resistance of stainless steel substrates// Surf. Coat. Tech., 1999, v. 114, p.129-136.

V. Mikli, A. Paat. Halogen sodalite investigation by the methods of electron microscopy// Proc. Estonian Acad. Sci., 1999, 5/1, p.71-86.

V. Mikli, P. Kulu, S. Zimakov, H. Käerdi. Characterization of metallic powders produced by mechanical milling// Proc. Lithuanian Acad. Sci. Materials Science, 1999, N.2, p.19-21.ISSN 1392-1320

M. Krunks, O. Bijakina, T.Varema, V. Mikli and E. Mellikov. Zinc oxide thin films by spray pyrolysis// Abstracts of the 18-th Nordic Semiconductor Meeting , Linköping, June 7-10, 1998, p. H106.

M. Krunks, V. Mikli, O. Bijakina and E. Mellikov. Growth and recrystallization of CuInS2 films in spray pyrolytic process// The Book of Abstracts of the 9-th International Conference on Solid Films and Surfaces, July 6-10 1998, Copenhagen, Denmark, p.P1.CG.13.

P. Kulu, A. Tümanok, V. Mikli, H. Käerdi, H. Kohutek, I. Besterci. Possibilities of powder particle granulometry and morphology by image analysis// Proc. Estonian Acad. Sci. 4/1,1998, p. 3-17.

S. Rudenja, P. Kulu, E. Talimets, V. Mikli, C. A. Straede. Corrosion perfomance of duplex TiN coatings, deposited by arc plating// Surf. Coat. Tech., 100-101, 1998, 247-250.

S. Rudenja, P. Kulu, E. Talimets, V. Mikli, C. A. Straede, T. Zweig. Electrochemical evaluation of TiN coatings// Electrochemical Society Proc. NJ, USA, 1997, Vol.97-31, 108-118.

V. Mikli, P. Kulu, A. Tümanok, H. Käerdi. Comparative investigation of disintegrated WC-Co powdres by the methods of sieving and image analysis// Proc. of 7th Int. Conf., "Mat. Engin.-98", Jurmala, 1998, p. 9-13.

V. Mikli, P. Kulu, S. Simakov, H. Käerdi. Comparative investigation of disintegrated WC-Co powders by different analysing methods// Proc. 3rd DAAAM Conf., Tallinn, 1998, p. 103-106. ISBN 9985-984-02-2

1. S. Rudenja, P. Kulu, E. Talimets, V. Mikli., F. Erikhov, C. A. Straede, T. Zweig. Corrosion Perfomance and Structure of the Titanium-Based Ccoatings Deposited onto Stainless Steel Substrate with Arc Plating// 40th Annual Technical Conference Proceedings Society of Vacuum Coaters, 1997, New Oreleans, 58-63.ISSN 0737-5921

2. S. Rudenja, P. Kulu, E. Talimets, V. Mikli., C. A. Straede. Improved Corrosion Resistance of Duplex PVD Coatings// Proceedings of DAAAM Conf., Estonia Talinn, 1997, 152-155. ISBN 3-901509-07-0

5. J. Hiie, M. Altosaar, E. Mellikov, J. Mädasson, J. Sapogova, V. Mikli. Isothermal Grain Growth of CdTe in CdCl2 and Te Fluxes// Proceedings of the IEEE Photovoltic Specialists Conference, Anarheim, 1997, p. 455-458.

7. S. Rudenja, E. Talimets, P. Kulu, V. Mikli. PVD Coatings for Corrosion Prevention . Corrosion: Permanent Danger for Society and Environment// Proceedings on 2nd Central Eastern and Northen European Regional Conference, Lithuania, palanga, 1997, 98-101

9. S. Rudenja, P. Kulu, E. Talimets, V. Mikli., C. A. Straede. Improved Corrosion Resistance of Duplex PVD Coatings// Meetings Abstracts. The 1997 Joint International Meeting, Paris, 1997, 1870.

P. Kulu, S. Rudenja, V. Mikli. Deposition of Hard Ti-based Coatings with Minimized Content of Microdroplet Phase by Arc Evaporation// J: Galvanotehnika i obrabotka poverhnostii, 1997, vol. 4(2), 46-54 (in Russian).

V. Mikli , P. Kulu, A. Tümanok, , H. Käerdi, H. Kohutek, I. Besterci Characterization of Metallic Powders Produced by Disintegrator Technology// Proceedings of DAAAM Conf., Estonia Talinn, 1997, 115-118.ISBN 3-901509-07-0

A. Kruusing, V. Mikli Flow sensing and pumping using flexible permanent magnet beams// Sensors and Actuators, A52,1996, p.59-64

A. Kruusing, V. Podgurski, V. Mikli Surface maching of Nd-Fe-B by excimer laser light// Proc. Estonian Acad. Sci. 2/1,1996, p. 137-142

P. Kulu, A. Tümanok, D. Arensburger, T. Pihl, V. Mikli, H. Käerdi Recyclinhg of hard metals// Proc. Estonian Acad. Sci. 2/1,1996, p. 60-71

P. Kulu, A. Tümanok, V. Mikli Utilisation of industrial metal scrap by mechanical means // Proc. Estonian Acad. Sci. 2/1,1996, p. 48-60

S. Rudenja, P. Kulu, E. Talimets, V. Mikli, O. Forsen Corrosion perfomance of Ti-based composite coatings deposited by physical vapour deposition// Proc. Estonian Acad. Sci. 2/1,1996, p. 14-26

P. Kulu, S. Rudenja, V. Mikli Deposition of hard titan-based coatings with minimized content of microdroplets phase by arc evaporation// Transactions of Tallinn Technical University, Powder materials and coatings X, Tallinn, 1994, P.61-76. ISSN 0868-4081

A. Atanassov, G. Zlateva, M. Baleva,*E. Goranova, B. Amov, C. Angelov, V. Mikli// Raman Scattering Characterization of Ion-Beam Synthesized Mg2Si, 1Influence of the Technological Conditionson the Formation of the Mg2Si in (100)Si Matrix. Plasma Process. Polym. 2006, 3, 219–223

A. K. Stoyanova-Ivanova , S. D. Terzieva, A. D. Staneva, V.Mikli, R.Traksmaa, Y. B. Dimitriev and V. T. Kovachev. Phase formation and microstructure in RE1-xCaxBa2Cu3Oz (RE=Y,Eu,Er; x=0,0.2,0.3) superconducting ceramics// Central European J. Chem, 4 (1), 167-174 (2006)

Angelov, Ch., Mikli, V., Amov, B. and Goranova, E. AFM and SEM investigations of ion beam synthesized Mg2Si precipitates in Si substrates// J. of Optoelectronics and Advanced Materials, 2005, Vol. 7, No.1, p. 369-373

Krunks, M., Kijatkina, O., Mere, A., Varema, T., Oja, I., Mikli, V. Sprayed CuInS2 films grown under Cu-rich conditions as absorbes for solar cells// Solar Energy Materials and Solar Cells, 2005, v. 87, p.207-214

K. Tõnsuaadu, K. Vatter, M. Peld, V. Mikli. Impact of Chelating Cd2+ Sorption with Apatites // Abstracts of 5th Int.Symp. on Inorg. Phosphate, Japan, 2005, p. 80.

Kulu, P., Mikli, V., Käerdi, H., Besterci, M. Angularity evaluation of milled WC-Co powder// Int. J. Materials and product Technology, 2005, Vol.22, No4, p. 289-298

Mikli V. Influence of second order lines on low accelerating voltage quantitative WDS analysis// Abstracts of 9th Eur Workshop, EMAS, 2005, Firenze, p. 314

Tarbe, R., Zimakov, S., Mikli,V., Kulu, P., Veinthal, R. Wear resistant powder coatings on the base of recycled hardmetal//Powder Metallurgy Progress, 2005, Vol.4, No3, p. 148-157 ISSN 1335-8987

Terzieva, S., Stoyanova-Ivanova, A., Zalamova, K., Mikli, V., Angelov, Ch. and Kovachev, V. Morphology of Y1Ba2Cu3Oz and Y0.7Ba2Cu3Oz bulk samples depending on Ca-substitution // J. of Optoelectronics and Advanced Materials, 2005, Vol.7, No.1, p. 477-481

Tõnsuaadu, K., Peld, M., Mikli, V., Bender, V., Traksmaa, R., Villani, F., Gruselle, M. Structural studies of apatite// Abstracts of NENANAT 2005, Tallinn, p. 19-21

V. Mikli, J. Hiie. Recrystallization of CdTe under conditions of high temperature and pressure// NATO Sci., II. Math, Phys, Chem. Nanostructured and advanced materials, V204, 2005, p. 351-354.ISBN 1-4020-3561-6

А. Стоянова –Иванова, С. Терзиева, V. Mikli, R. Traksmaa и В. Ковачев. Текстура и структура на горещо валцувани YBCO ленти с калциева (Ca) субституция” (“TEXTURE AND STRUCTURE OF HOT-ROLLING YBCO TAPES WITH Ca-SUBSTITUTION ”)// Списание на БАН (Magazine of BAS), 5, 1-4 (2005)

J. Hiie, V. Valdna, J. Kois, M. Danilson, V. Mikli. Chemistry of CdCl2:O2 Flux for CdTe Solar Cell Technology// 19th EPVSECE, Paris, 7-11.o6.2004.4AV.1.65

Mikli, V., Kulu, P., Tarbe, R. Peetsalu P., Zimakov, S. Recycled hardmetal–based powders for thermal spray// Proc. Estonian Acad. Sci. Eng., 2004, 10, 4, p. 315-325.

Zimakov, S., Mikli, V., Kulu, P., Tarbe, R. Wear resistant sprayed coatings on the base of recycled hardmetal powder//Proc. of 13th Int. Conf. Engineering Materials& Tribology, 2004, Riga, p. 83-88.

V. Mikli, P. Kulu, R. Tarbe, P. Peetsalu. Double-Cemented Recycled Hardmetal Based Powders for Thermal Spray// Proc. 4rd Int. DAAAM Conf., Tallinn, 2004, p. 211-214. ISBN 9985-894-69-3

Kulu, P., Mikli, V., Käerdi, H., Besterci, M. Characterization of disintegrator milled hardmetal powder//Powder Metallurgy Progress, 2003, Vol.3, No1, p. 34-48.ISSN 1335-8987

Pavlov L.I., Angelov Ch.V., Mikli V., Amov B.G., Djakov A.E. Microstructural changes and optical properties of laser annealed bismuth-implanted silicon// Vacuum, 2003, 69, p. 119-124.

Peetsalu, P., Zimakov, S., Goljandin, D., Kulu, P., Mikli. M., Käerdi, H. Micropowders produced by disintegrator milling//Abstracts of 12th Int. Conf. Engineering Materials& Tribology, BALTMATTRIB2003, Tallinn, 2003, p. 32-33

P. Peetsalu, D. Goljandin, P. Kulu, V. Mikli, H. Käerdi. Micropowders produced by disintegrator milling//Powder Metallurgy Progress, 2003, Vol.3, No2, p. 99-110. ISSN 1335-8987

Zimakov, S., Pihl, T., Kulu, P., Antonov, M, Mikli, V. Applications of recycled hardmetal powder//Abstracts of 12th Int. Conf. Engineering Materials& Tribology, BALTMATTRIB2003, Tallinn, 2003, p. 43-44.

Zimakov, S., Pihl, T., Kulu, P., Antonov, M, Mikli, V. Applications of recycled hardmetal powder// Proc. Estonian Acad. Sci. Eng., 2003, 9/4, p.304-316.

I Kohutek, H. Käerdi, M. Besterci, P. Kulu, V. Mikli, O.Velgosova.WC-Co powder particles morphological characteristics// Proc. Int. Conf. Deformation and fracture in structural PM materials, DF PM 2002, Stara Lesna, Slovakkia, 2002, p. 230-235.

M. Krunks, O. Kijatkina, H. Rebane, I. Oja, V. Mikli, A. Mere. Composition of CuInS2 thin films prepared by spray pyrolysis// Thin Solid Films, 2002, v. 403-404, p.71-75.

P. Kulu, H. Käerdi V. Mikli. Retreatment of used hardmetals// Proc. of TMS2002 Recycling and Waste Treatment in Mineral and Metal Processing: Technical and Economic Aspects, Vol. 1, 2002, Sweden, 139-146.

V. Mikli, P. Kulu, H. Käerdi. Angularity of the disintegrator ground hardmetal powder particles// Proc. Lithuanian Acad. Sci. Materials Science, 2002, Vol.8, 4, p. 430-433. ISSN 1392-1320

V. Mikli, P. Kulu, H. Käerdi. Development of the morphology and granulometry methods for characterization of WC-Co hardmetal powders// Proc. 3rd Int. DAAAM Conf., Tallinn, 2002, p. 201-204. ISBN 9985-59-272-7

Ch. Angelov, P. Groudev, V. Mikli. Use of atomic-force microscopy for characterization of silicon, implated with heavy ions at high doses// Proc.of 11th Conf. ”Materials for Information tech.in the new Millenium”, ISCMP, 2000, Varna, p. 460-464

Ch. Angelov, V. Mikli, M. Kalitzova, G. Beshkov. Pb and Bi nanoclaster precipitation in high-dose implated and RTA Si: SEM and RHEED analyses//Proc.of 11th Conf. ”Materials for Information tech.in the new Millenium”, ISCMP, 2000, Varna, p. 452-455.

H. Käerdi, V. Mikli, P. Kulu, O.Velgosova, I Kohutek, M. Besterci. Characterization of hardmetal powder particles// Proc. of 10th Int. Conf., "Mat. Engin. & Balttrib’2001, Jurmala, 2001, p.3-7.

Mikli, V., Käerdi, H., Kulu, P. and Besterci, M. Characterization of powder particle angularity // Acta Metallurgica Slovaca, 7, 2001, p.75-78.

Mikli, V., Käerdi, H., Kulu, P. and Besterci, M. Characterization of powder particle morphology // Proc. Estonian Acad. Sci. Eng., 2001, 7, 1, 22-34.

M. Krunks, O. Bijakina, H. Rebane, A.Oja,. V. Mikli, Mere. Composition of CuInS2 films prepared by spray pyrolysis// Abstracts of E-MRS 2001,05.-08.06. p.4

M. Krunks, O. Bijakina, V. Mikli, H. Rebane, T. Varema, M. Altosaar, E. Mellikov, Sprayed CuInS2 thin films for solar cells: the effect of solution composition and post-deposition treatments// Solar Cells and Solar Cell Materials, 2001, 69, 1, p. 93-98.

M. M. Kaplun, Yu. E. Smirnov, V. Mikli, V. V. Malev. Structure of Cobalt Hexacyanoferrate Films Synthesized from a Complex Electrolyte// Russ. J. of Electrochemistry, 2001, v.37, n.9, p. 914-923.

S. Rudenja, J. Pan, I. Odnewall Wallinder, C. Leygraf, P. Kulu, V. Mikli. Enhanced Passivity of Austenitic AISI 304 Stainless steel by Low-Temperature Ion Nitriding // J. Vac.Sci. Technol. 2001, A19(4), p. 1425-1431.

S. Rudenja, P. Kulu, V. Mikli. Corrosion failure of columnar TiN layer by enhanced anodic oxidation // Abstracts of MRS Meeting, 2001, San-Francisco, S1.2.

V. Mikli, M. Krunks. Investigation of sprayed thin films on glass substrates by X-ray Microanalysis// Abstracts of Int. Conf.on X-ray optics and microanalysis, 2001, p. 117.

V. Mikli, P. Kulu, H. Käerdi. Application of image analysis methods to characterize the impact-milled WC-Co powder particles// Abstracts of 8th Eur. Congress for Stereology and Image Analysis, 2001, p. 196-197

V. Mikli, P. Kulu, H. Käerdi. Application of image analysis methods to characterize the impact-milled WC-Co powder particles// Image Anal Stereology, 2001; 20, p. 199-204. ISSN 1580-3139

V.Mikli,V. Hodireva. Fast EDS analysis for determination of mineralogical objectscomposition// Abstracts of 7th EMAS European Workshop in Tampere 06.-10.05.2001, p.348.

2. V. Mikli, P. Kulu, H. Käerdi. WC-Co hardmetal powders for formation of wear resistant coatings// Proc. 2rd Int. DAAAM Conf., Tallinn, 2000, p. 201-204. ISBN 9985-894-21-9

A. Tümanok, P. Kulu, V. Mikli, H. Käerdi. Technology and equipment for production of hardmetal powders from used hardmetal // Proc. 2rd Int. DAAAM Conf., Tallinn, 2000, p. 197-200 ISBN 9985-894-21-9

M. Krunks, V. Mikli, O. Bijakina, H. Rebane, A. Mere, T. Varema, E. Mellikov. Composition and structure of CuInS2 films prepared by spray pyrolysis// Thin Solid Films, 2000, v. 361-362, p.61-64.

S. Rudenja, I. Odnewall Wallinder, C. Leygraf, P. Kulu, V. Mikli. Enhanced Passivity of Austenitic AISI 304 Stainless steel by Low-Temperature Ion Nitriding // Abstracts of 47th Int. Symp.of American Vacuum Society, 2-6. Oct.2000, p. 73.

T. Pihl, V. Mikli. The technology and properties of sprayed coatings // Proc. 2rd Int. DAAAM Conf., Tallinn, 2000, p. 218-220.ISBN 9985-894-21-9

V. Mikli, P. Kulu, H. Käerdi. The composition and structure investigation of recycled hardmetal powder for thermal spray// Proc. Joint Nordic Conference in POWDER TECHNOLOGY, Stockholm, p. 21.

V. Mikli, P. Kulu, H. Käerdi. The composition and structure investigation of recycled hardmetal powder for thermal spray// Proc. Joint Nordic Conference in POWDER TECHNOLOGY, Stockholm, p. 21.

H. Mändar, J.Felsche, V.Mikli, T.Vajakas, AXES 1.9: new tools for estimation of crystallite size and shape by Williamson-Hall analysis// J. Appl. Cryst., 1999, v.32, p.345-350.

M. Krunks, O.Bijakina, T.Varema, V. Mikli and E. Mellikov, Structural and optical properties of sprayed CuInS2 films// Thin Solid Films, 1999, v. 338, p.125-130.

M. Krunks, O.Bijakina, T.Varema, V. Mikli and E. Mellikov, Zinc oxide thin films by spray pyrolysis method// Physica Scripta, 1999, v.T79, p.209-212.

M. Krunks, O. Bijakina, V. Mikli, H. Rebane, T. Varema, M. Altosaar, E. Mellikov, Sprayed CuInS2 thin films for solar cells: the effect of solution composition and post-deposition treatments// Technical Digest of the International PVSEC-11, Sapporo, Hokkaido, 1999, Japan, p.845-846.

M. Krunks, V. Mikli, O. Bijakina and E. Mellikov, Growth and recrystallization of CuInS2 films in spray pyrolytic process// Applied Surface Science, 1999, v.142, p.356-361.

M. Krunks, V. Mikli, O. Bijakina and E. Mellikov. Growth and recrystallization of CuInS2 films in spray pyrolytic process// The Book of Abstracts of the 9-th International Conference on Solid Films and Surfaces, July 6-10 1998, Copenhagen, Denmark, p.P1.CG.13.

M. Krunks, V. Mikli, O. Bijakina, H. Rebane, A. Mere, T. Varema, E. Mellikov, Composition and structure of CuInS2 films prepared by spray pyrolysis// European Material conference ERRS 1999 Spring Meeting, Strasbourg, June 1-4, Book of abstracts O-PS I/P09, p. O13.

S. Rudenja, C. Leygraf, J. Pan, P. Kulu, E. Talimets, V. Mikli, Duplex TiN coatings deposited by arc plating increased corrosion resistance of stainless steel substrates// Surf. Coat. Tech., 1999, v. 114, p.129-136.

V. Mikli, A. Paat. Halogen sodalite investigation by the methods of electron microscopy// Proc. Estonian Acad. Sci., 1999, 5/1, p.71-86.

V. Mikli, P. Kulu, S. Zimakov, H. Käerdi. Characterization of metallic powders produced by mechanical milling// Proc. Lithuanian Acad. Sci. Materials Science, 1999, N.2, p.19-21.ISSN 1392-1320

M. Krunks, O. Bijakina, T.Varema, V. Mikli and E. Mellikov. Zinc oxide thin films by spray pyrolysis// Abstracts of the 18-th Nordic Semiconductor Meeting , Linköping, June 7-10, 1998, p. H106.

M. Krunks, V. Mikli, O. Bijakina and E. Mellikov. Growth and recrystallization of CuInS2 films in spray pyrolytic process// The Book of Abstracts of the 9-th International Conference on Solid Films and Surfaces, July 6-10 1998, Copenhagen, Denmark, p.P1.CG.13.

P. Kulu, A. Tümanok, V. Mikli, H. Käerdi, H. Kohutek, I. Besterci. Possibilities of powder particle granulometry and morphology by image analysis// Proc. Estonian Acad. Sci. 4/1,1998, p. 3-17.

S. Rudenja, P. Kulu, E. Talimets, V. Mikli, C. A. Straede. Corrosion perfomance of duplex TiN coatings, deposited by arc plating// Surf. Coat. Tech., 100-101, 1998, 247-250.

S. Rudenja, P. Kulu, E. Talimets, V. Mikli, C. A. Straede, T. Zweig. Electrochemical evaluation of TiN coatings// Electrochemical Society Proc. NJ, USA, 1997, Vol.97-31, 108-118.

V. Mikli, P. Kulu, A. Tümanok, H. Käerdi. Comparative investigation of disintegrated WC-Co powdres by the methods of sieving and image analysis// Proc. of 7th Int. Conf., "Mat. Engin.-98", Jurmala, 1998, p. 9-13.

V. Mikli, P. Kulu, S. Simakov, H. Käerdi. Comparative investigation of disintegrated WC-Co powders by different analysing methods// Proc. 3rd DAAAM Conf., Tallinn, 1998, p. 103-106. ISBN 9985-984-02-2

1. S. Rudenja, P. Kulu, E. Talimets, V. Mikli., F. Erikhov, C. A. Straede, T. Zweig. Corrosion Perfomance and Structure of the Titanium-Based Ccoatings Deposited onto Stainless Steel Substrate with Arc Plating// 40th Annual Technical Conference Proceedings Society of Vacuum Coaters, 1997, New Oreleans, 58-63.ISSN 0737-5921

2. S. Rudenja, P. Kulu, E. Talimets, V. Mikli., C. A. Straede. Improved Corrosion Resistance of Duplex PVD Coatings// Proceedings of DAAAM Conf., Estonia Talinn, 1997, 152-155. ISBN 3-901509-07-0

5. J. Hiie, M. Altosaar, E. Mellikov, J. Mädasson, J. Sapogova, V. Mikli. Isothermal Grain Growth of CdTe in CdCl2 and Te Fluxes// Proceedings of the IEEE Photovoltic Specialists Conference, Anarheim, 1997, p. 455-458.

7. S. Rudenja, E. Talimets, P. Kulu, V. Mikli. PVD Coatings for Corrosion Prevention . Corrosion: Permanent Danger for Society and Environment// Proceedings on 2nd Central Eastern and Northen European Regional Conference, Lithuania, palanga, 1997, 98-101

9. S. Rudenja, P. Kulu, E. Talimets, V. Mikli., C. A. Straede. Improved Corrosion Resistance of Duplex PVD Coatings// Meetings Abstracts. The 1997 Joint International Meeting, Paris, 1997, 1870.

P. Kulu, S. Rudenja, V. Mikli. Deposition of Hard Ti-based Coatings with Minimized Content of Microdroplet Phase by Arc Evaporation// J: Galvanotehnika i obrabotka poverhnostii, 1997, vol. 4(2), 46-54 (in Russian).

V. Mikli , P. Kulu, A. Tümanok, , H. Käerdi, H. Kohutek, I. Besterci Characterization of Metallic Powders Produced by Disintegrator Technology// Proceedings of DAAAM Conf., Estonia Talinn, 1997, 115-118.ISBN 3-901509-07-0

A. Kruusing, V. Mikli Flow sensing and pumping using flexible permanent magnet beams// Sensors and Actuators, A52,1996, p.59-64

A. Kruusing, V. Podgurski, V. Mikli Surface maching of Nd-Fe-B by excimer laser light// Proc. Estonian Acad. Sci. 2/1,1996, p. 137-142

P. Kulu, A. Tümanok, D. Arensburger, T. Pihl, V. Mikli, H. Käerdi Recyclinhg of hard metals// Proc. Estonian Acad. Sci. 2/1,1996, p. 60-71

P. Kulu, A. Tümanok, V. Mikli Utilisation of industrial metal scrap by mechanical means // Proc. Estonian Acad. Sci. 2/1,1996, p. 48-60

S. Rudenja, P. Kulu, E. Talimets, V. Mikli, O. Forsen Corrosion perfomance of Ti-based composite coatings deposited by physical vapour deposition// Proc. Estonian Acad. Sci. 2/1,1996, p. 14-26

P. Kulu, S. Rudenja, V. Mikli Deposition of hard titan-based coatings with minimized content of microdroplets phase by arc evaporation// Transactions of Tallinn Technical University, Powder materials and coatings X, Tallinn, 1994, P.61-76. ISSN 0868-4081